Language:
| Turbo Model | GT1752S |
| Vehicle OE No | 5955703 |
| Model | 9.3 |
| Engine | B205E |
| ETP # | OE # | Ref # | |
| CHRA | 433352-0055 | ||
| Bearing Housing | 713782-0006 | ||
| Shaft & Wheel | 434714-0034 | ||
| Compressor Wheel | 436131-0002 | ||
| Back Plate | 701335-0001 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 413567-0061 | ||
| Compressor Cover | 409589-0622 | ||
| Actuator | 432340-0068 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | 142 | ||
| C/hsg Angle | 110 | ||
| Actuator Calibration 1 | 0.36Bar-0.40Bar = 0.38mm movement | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452204-0005 |
| Bearing Housing OE | 713782-0006 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 452204-0005 |
| Shaft & Wheel OE | 434714-0034 |
| Ref | |
| Inducer Diameter(I) | 44.2 |
| Exducer Diameter(II) | 37.3 |
| Tip Height(III) | 7.5 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 452204-0005 |
| Compressor Wheel OE | 436131-0002 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4.8 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 452204-0005 |
| Seal Plate & Back Plate OE | 701335-0001 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 96.15 |
| Plate Diameter(I) | 112.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
