Language:
| Turbo Model | GT1849V |
| Vehicle OE No | 24418170 |
| Model | 9-3 TiD |
| Engine | Y2DTR |
| ETP # | OE # | Ref # | |
| CHRA | 703890-0029 | ||
| Bearing Housing | 722282-0037 | ||
| Shaft & Wheel | 704580-0001 | ||
| Compressor Wheel | 436132-0003 | ||
| Back Plate | 700593-0006 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | 704013-0011 | ||
| Turbine Housing | 708750-0009 | ||
| Compressor Cover | 710314-0002 | ||
| Actuator | 434855-0060 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 300 | ||
| C/hsg Angle | 329 | ||
| Actuator Calibration 1 | 0.197-0.203 bar = 0.5 -4.0 mm | ||
| Actuator Calibration 2 | 0.530-0.570 bar = 0.2 mm | ||
| Actuator Calibration 3 | 0.685 bar = Vanes Closed | ||
| ETP No. | |
| Turbo OE | 705204-0002 |
| Bearing Housing OE | 722282-0037 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 705204-0002 |
| Shaft & Wheel OE | 704580-0001 |
| Ref | |
| Inducer Diameter(I) | 44.5 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 8.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 705204-0002 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 705204-0002 |
| Seal Plate & Back Plate OE | 700593-0006 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 89.6 |
| Plate Diameter(I) | 99 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
