Language:
| Turbo Model | GT1549 |
| Vehicle OE No | 90490613 |
| Model | 9.5 |
| Engine | B308 (V6) |
| ETP # | OE # | Ref # | |
| CHRA | 433352-0035 | ||
| Bearing Housing | 434578-0005 | ||
| Shaft & Wheel | 434712-0020 | ||
| Compressor Wheel | 436132-0001 | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 703209-0002 | ||
| Compressor Cover | 436078-0003 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.0G Max 90,000 -168,00 | ||
| T/hsg Angle | 103 | ||
| C/hsg Angle | 70 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 708699-0001 |
| Bearing Housing OE | 434578-0005 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 708699-0001 |
| Shaft & Wheel OE | 434712-0020 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 708699-0001 |
| Compressor Wheel OE | 436132-0001 |
| Ref | |
| Inducer Diameter(III) | 37.8 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 5.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 708699-0001 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
