Language:
| Turbo Model | K03-2075EYD5.88KCAXH |
| Vehicle OE No | 06A145713E |
| Model | Ibiza Cupra 1.8T |
| Engine | 1.8-5V quer/transversal |
| ETP # | OE # | Ref # | |
| CHRA | 5303-710-0516 | ||
| Bearing Housing | 5304-150-0017 | ||
| Shaft & Wheel | 5303-120-5023 | ||
| Compressor Wheel | 5304-123-2029 | ||
| Back Plate | 5304-151-5712 | ||
| Heat Shield | 5303-165-2000 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9078 | ||
| Compressor Cover | 5304-100-5017 | ||
| Actuator | 5825-110-4130 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 183.5 | ||
| C/hsg Angle | 266.5 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0082 |
| Bearing Housing OE | 5304-150-0017 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | WATER |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 62 |
| ETP No. | |
| Turbo OE | 5303-970-0082 |
| Shaft & Wheel OE | 5303-120-5023 |
| Ref | |
| Inducer Diameter(I) | 45 |
| Exducer Diameter(II) | 40.3 |
| Tip Height(III) | 7.7 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5303-970-0082 |
| Compressor Wheel OE | 5304-123-2029 |
| Ref | |
| Inducer Diameter(III) | 38.1 |
| Exducer Diameter(IV) | 51 |
| Tip Height(II) | 5.5 |
| Total Height(I) | 25.7 |
| Number of Blades | 4 |
| Flatback / Superback(Trim) | 2075 Superback |
| Shaft / Bore | 4.6 |
| ETP No. | |
| Turbo OE | 5303-970-0082 |
| Seal Plate & Back Plate OE | 5304-151-5712 |
| Ref | |
| Plate Diameter(III) | 52.00 |
| Plate Diameter(II) | 85.2 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
