Language:
| Turbo Model | GT1541V(S2) |
| Vehicle OE No | 045145701E |
| Model | Arosa Tdi |
| Engine | 1.2 UI |
| ETP # | OE # | Ref # | |
| CHRA | 703889-0020 | ||
| Bearing Housing | 722282-0010 | ||
| Shaft & Wheel | 708450-0004 | ||
| Compressor Wheel | 704765-0003 | ||
| Back Plate | 700593-0001 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 702352-0015 | ||
| Compressor Cover | 433385-0003 | ||
| Actuator | 433483-0014 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.264 -0.269 bar = 0.5 -3.5 mm | ||
| Actuator Calibration 2 | 0.580 -0.620 bar => 0.2 mm | ||
| Actuator Calibration 3 | 0.620 bar = Vanes Closed | ||
| ETP No. | |
| Turbo OE | 700960-0005 |
| Bearing Housing OE | 722282-0010 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 700960-0005 |
| Shaft & Wheel OE | 708450-0004 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 700960-0005 |
| Compressor Wheel OE | 704765-0003 |
| Ref | |
| Inducer Diameter(III) | 27.5 |
| Exducer Diameter(IV) | 41 |
| Tip Height(II) | 2.9 |
| Total Height(I) | 22.3 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 700960-0005 |
| Seal Plate & Back Plate OE | 700593-0001 |
| Ref | |
| Plate Diameter(III) | 45.00 |
| Plate Diameter(II) | 84.15 |
| Plate Diameter(I) | 95 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
