Language:
| Turbo Model | GT1646V |
| Vehicle OE No | 03G253014F |
| Model | 03G253014F |
| Engine | R4 2valve |
| ETP # | OE # | Ref # | |
| CHRA | 660126 in stock | 703890-0299 | |
| Bearing Housing | 110112 in stock | NA | |
| Shaft & Wheel | 260113 in stock | NA | |
| Compressor Wheel | 280229 in stock | 704768-0005 | |
| Back Plate | 360115 in stock | NA | |
| Heat Shield | 350106 in stock | 433112-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110112 |
| Turbo OE | 751851-0003 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260113 |
| Turbo OE | 751851-0003 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 41 |
| Exducer Diameter(II) | 34 |
| Tip Height(III) | 6.4 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | 280229 |
| Turbo OE | 751851-0003 |
| Compressor Wheel OE | 704768-0005 |
| Ref | |
| Inducer Diameter(III) | 32.5 |
| Exducer Diameter(IV) | 46 |
| Tip Height(II) | 3.5 |
| Total Height(I) | 23.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360115 |
| Turbo OE | 751851-0003 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | 47.20 |
| Plate Diameter(II) | 84.2 |
| Plate Diameter(I) | 95 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
