Language:
| Turbo Model | GT2052V |
| Vehicle OE No | 059145701G |
| Model | SuperbTdi |
| Engine | TDI V6 |
| ETP # | OE # | Ref # | |
| CHRA | 660185 in stock | 434766-0015 | |
| Bearing Housing | 110142 in stock | 434765-0001 | |
| Shaft & Wheel | 260132 in stock | 434883-0017 | |
| Compressor Wheel | 280247 in stock | 436131-0002 | |
| Back Plate | 360127 in stock | 701335-0003 | |
| Heat Shield | 350108 in stock | 443768-0003 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 434762-0001 | ||
| Compressor Cover | 434562-0002 | ||
| Actuator | 434855-0001 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.171Bar-0.176Bar = 0.5mm to 3.5mm | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110142 |
| Turbo OE | 454135-0006 |
| Bearing Housing OE | 434765-0001 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260132 |
| Turbo OE | 454135-0006 |
| Shaft & Wheel OE | 434883-0017 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 38.7 |
| Tip Height(III) | 8 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280247 |
| Turbo OE | 454135-0006 |
| Compressor Wheel OE | 436131-0002 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4.8 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360127 |
| Turbo OE | 454135-0006 |
| Seal Plate & Back Plate OE | 701335-0003 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
