Language:
| Turbo Model | GT2256V |
| Vehicle OE No | 55191597 |
| Model | 156/166 JTD 5 Cyl. -2.4L DI D |
| Engine | 841C.000 |
| ETP # | OE # | Ref # | |
| CHRA | 660189 in stock | NA | |
| Bearing Housing | 110140 in stock | NA | |
| Shaft & Wheel | 260138 in stock | NA | |
| Compressor Wheel | 280254 in stock | NA | |
| Back Plate | 360134 in stock | 701335-0010 | |
| Heat Shield | 350108 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | 723455-0005 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 172 | ||
| C/hsg Angle | 35 | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.264 -0.269 bar = 3.5 -6.0mm | ||
| Actuator Calibration 3 | 0.625 bar = Vanes Closed | ||
| ETP No. | 110140 |
| Turbo OE | 710811-0002 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260138 |
| Turbo OE | 710811-0002 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280254 |
| Turbo OE | 710811-0002 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360134 |
| Turbo OE | 710811-0002 |
| Seal Plate & Back Plate OE | 701335-0010 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
