Language:
| Turbo Model | GT2556V |
| Vehicle OE No | 2247691F |
| Model | 530D & 730D 3.0L |
| Engine | M57D E38. E39 |
| ETP # | OE # | Ref # | |
| CHRA | 660188 in stock | 434766-0016 | |
| Bearing Housing | 110146 in stock | 722282-0004 | |
| Shaft & Wheel | 260141 in stock | 434717-0033 | |
| Compressor Wheel | 280257 in stock | 701374-0001 | |
| Back Plate | 360132 in stock | 701335-0005 | |
| Heat Shield | 350108 in stock | 443768-0003 | |
| Nozzle Ring Assembly | 700968-0002 | ||
| Turbine Housing | 705815-0002 | ||
| Compressor Cover | 700976-0001 | ||
| Actuator | 434855-0018 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110146 |
| Turbo OE | 454191-0007 |
| Bearing Housing OE | 722282-0004 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260141 |
| Turbo OE | 454191-0007 |
| Shaft & Wheel OE | 434717-0033 |
| Ref | |
| Inducer Diameter(I) | 51.4 |
| Exducer Diameter(II) | 47 |
| Tip Height(III) | 9.5 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280257 |
| Turbo OE | 454191-0007 |
| Compressor Wheel OE | 701374-0001 |
| Ref | |
| Inducer Diameter(III) | 41.6 |
| Exducer Diameter(IV) | 56 |
| Tip Height(II) | 5.3 |
| Total Height(I) | 29.2 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Deep superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360132 |
| Turbo OE | 454191-0007 |
| Seal Plate & Back Plate OE | 701335-0005 |
| Ref | |
| Plate Diameter(III) | 57.10 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
