Language:
| Turbo Model | TF035HL |
| Vehicle OE No | 7795499K10 |
| Model | 320d 160HP (04-07) |
| Engine | M47TUE |
| ETP # | OE # | Ref # | |
| CHRA | 660268 in stock | 49135-08911 | |
| Bearing Housing | 49135-08921 | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | NA | ||
| Back Plate | 49135-15405 | ||
| Heat Shield | 350124 in stock | NA | |
| Nozzle Ring Assembly | 370127 in stock | M235-2301 | |
| Turbine Housing | 220142 in stock | NA | |
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 49135-05670 |
| Bearing Housing OE | 49135-08921 |
| Ref | |
| VNT or Non-VNT | VNT |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 114.6 |
| ETP No. | |
| Turbo OE | 49135-05670 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 43.2 |
| Exducer Diameter(II) | 37.7 |
| Tip Height(III) | 7.4 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 5 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 49135-05670 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | 38.4 |
| Exducer Diameter(IV) | 51 |
| Tip Height(II) | 4 |
| Total Height(I) | 24.2 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 7 |
| ETP No. | |
| Turbo OE | 49135-05670 |
| Seal Plate & Back Plate OE | 49135-15405 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 39.9 |
| Plate Depth(IV) | 10 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
