Language:
| Turbo Model | GT1549V |
| Vehicle OE No | 2248901G |
| Model | 320 D -4 cyl. -2.0L |
| Engine | M47D E46 |
| ETP # | OE # | Ref # | |
| CHRA | 660140 in stock | 706287-0001 | |
| Bearing Housing | 110122 in stock | 706288-0001 | |
| Shaft & Wheel | 260117 in stock | 434533-0002 | |
| Compressor Wheel | 280224 in stock | 436132-0003 | |
| Back Plate | 360108 in stock | 700593-0006 | |
| Heat Shield | 350106 in stock | NA | |
| Nozzle Ring Assembly | 370108 in stock | 434596-0002 | |
| Turbine Housing | 220107 in stock | 705839-0003 | |
| Compressor Cover | 240109 in stock | 434725-0001 | |
| Actuator | 390142 in stock | 434855-0020 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168 | ||
| T/hsg Angle | 150 | ||
| C/hsg Angle | 341 | ||
| Actuator Calibration 1 | 0.171 -0.176 bar = 0.5 -3.5 mm | ||
| Actuator Calibration 2 | 0.580 -0.620 bar = 0.2 mm | ||
| Actuator Calibration 3 | 0.620 bar = Vanes Closed | ||
| ETP No. | 110122 |
| Turbo OE | 700447-0004 |
| Bearing Housing OE | 706288-0001 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260117 |
| Turbo OE | 700447-0004 |
| Shaft & Wheel OE | 434533-0002 |
| Ref | |
| Inducer Diameter(I) | 43.1 |
| Exducer Diameter(II) | 36 |
| Tip Height(III) | 5.9 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | 280224 |
| Turbo OE | 700447-0004 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360108 |
| Turbo OE | 700447-0004 |
| Seal Plate & Back Plate OE | 700593-0006 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 89.6 |
| Plate Diameter(I) | 99 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
