Language:
| Turbo Model | GT1549V |
| Vehicle OE No | 2247901104 |
| Model | 320 D -4 cyl. -2.0L |
| Engine | M47D E46/E39 |
| ETP # | OE # | Ref # | |
| CHRA | 660140 in stock | NA | |
| Bearing Housing | 110122 in stock | NA | |
| Shaft & Wheel | 260117 in stock | NA | |
| Compressor Wheel | 280224 in stock | NA | |
| Back Plate | 360108 in stock | NA | |
| Heat Shield | 350106 in stock | NA | |
| Nozzle Ring Assembly | 370108 in stock | NA | |
| Turbine Housing | 220107 in stock | NA | |
| Compressor Cover | 240109 in stock | NA | |
| Actuator | 390142 in stock | NA | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110122 |
| Turbo OE | 700447-0008 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260117 |
| Turbo OE | 700447-0008 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280224 |
| Turbo OE | 700447-0008 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360108 |
| Turbo OE | 700447-0008 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
