Language:
| Turbo Model | GT1749V |
| Vehicle OE No | 7785410 |
| Model | 740 D -V8 -4.0L |
| Engine | M67D E38 1-4 |
| ETP # | OE # | Ref # | |
| CHRA | 703890-0005 | ||
| Bearing Housing | 722282-0014 | ||
| Shaft & Wheel | 434533-0057 | ||
| Compressor Wheel | 436132-0003 | ||
| Back Plate | 703682-0023 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 708035-0001 | ||
| Compressor Cover | 434725-0002 | ||
| Actuator | 704063-0006 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 703672-0002 |
| Bearing Housing OE | 722282-0014 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 703672-0002 |
| Shaft & Wheel OE | 434533-0057 |
| Ref | |
| Inducer Diameter(I) | 43.1 |
| Exducer Diameter(II) | 37.5 |
| Tip Height(III) | 6.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 703672-0002 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 703672-0002 |
| Seal Plate & Back Plate OE | 703682-0023 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 89.6 |
| Plate Diameter(I) | 99 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
