Language:
| Turbo Model | GT1549S |
| Vehicle OE No | 9633647480 |
| Model | ZX 1.9L -IDI D |
| Engine | XUD9TE/DHY |
| ETP # | OE # | Ref # | |
| CHRA | 660117 in stock | 433289-0057 | |
| Bearing Housing | 110110 in stock | 433275-0002 | |
| Shaft & Wheel | 260111 in stock | 433165-0001 | |
| Compressor Wheel | 280220 in stock | 436132-0002 | |
| Back Plate | 360117 in stock | 700593-0004 | |
| Heat Shield | 1102-015-343 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 435788-0053 | ||
| Compressor Cover | 435791-0040 | ||
| Actuator | 433480-0003 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 193 | ||
| C/hsg Angle | 282 | ||
| Actuator Calibration 1 | 1.12Bar-1.20Bar = 1.00mm movement | ||
| Actuator Calibration 2 | 1.230 -1.270 = 3.00 | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110110 |
| Turbo OE | 454176-0005 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260111 |
| Turbo OE | 454176-0005 |
| Shaft & Wheel OE | 433165-0001 |
| Ref | |
| Inducer Diameter(I) | 41.5 |
| Exducer Diameter(II) | 35.2 |
| Tip Height(III) | 7.1 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | 280220 |
| Turbo OE | 454176-0005 |
| Compressor Wheel OE | 436132-0002 |
| Ref | |
| Inducer Diameter(III) | 36.3 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.6 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360117 |
| Turbo OE | 454176-0005 |
| Seal Plate & Back Plate OE | 700593-0004 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 91.25 |
| Plate Diameter(I) | 120 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 9.3 |
| Flatback / Superback | superback |
