Language:
| Turbo Model | GT1546S |
| Vehicle OE No | 9645247280 |
| Model | C5 HDI 2.0L |
| Engine | DW10ATD2S |
| ETP # | OE # | Ref # | |
| CHRA | 660128 in stock | 433289-0124 | |
| Bearing Housing | 110110 in stock | 435793-0002 | |
| Shaft & Wheel | 260110 in stock | 707669-0010 | |
| Compressor Wheel | 280222 in stock | 436624-0002 | |
| Back Plate | 360105 in stock | 436399-0002 | |
| Heat Shield | 350104 in stock | 434302-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 435788-0063 | ||
| Compressor Cover | 435791-0090 | ||
| Actuator | 433452-0037 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -138,000rpm | ||
| T/hsg Angle | 155 | ||
| C/hsg Angle | 68 | ||
| Actuator Calibration 1 | 1.05 -1.12 bar = 1.00 mm | ||
| Actuator Calibration 2 | 1.24 -1.29 bar = 3.00 mm | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110110 |
| Turbo OE | 706977-0002 |
| Bearing Housing OE | 435793-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260110 |
| Turbo OE | 706977-0002 |
| Shaft & Wheel OE | 707669-0010 |
| Ref | |
| Inducer Diameter(I) | 42 |
| Exducer Diameter(II) | 38.2 |
| Tip Height(III) | 6 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | 280222 |
| Turbo OE | 706977-0002 |
| Compressor Wheel OE | 436624-0002 |
| Ref | |
| Inducer Diameter(III) | 34.1 |
| Exducer Diameter(IV) | 46 |
| Tip Height(II) | 4.3 |
| Total Height(I) | 23.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360105 |
| Turbo OE | 706977-0002 |
| Seal Plate & Back Plate OE | 436399-0002 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 118 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
