Language:
| Turbo Model | GT1544V |
| Vehicle OE No | 9663199280 |
| Model | C5 HDI -4 cyl. -1.6L -DI D |
| Engine | DV6TED4 |
| ETP # | OE # | Ref # | |
| CHRA | 660109 in stock | NA | |
| Bearing Housing | 110108 in stock | NA | |
| Shaft & Wheel | 260106 in stock | NA | |
| Compressor Wheel | 280223 in stock | 737683-0003 | |
| Back Plate | 360110 in stock | NA | |
| Heat Shield | 350103 in stock | NA | |
| Nozzle Ring Assembly | 370102 in stock | NA | |
| Turbine Housing | 220104 in stock | NA | |
| Compressor Cover | 240103 in stock | NA | |
| Actuator | 390104 in stock | 737348-0003 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.135 -0.215 bar = 2.2 -5.2 mm | ||
| Actuator Calibration 3 | 0.6 bar = Vanes Closed | ||
| ETP No. | 110108 |
| Turbo OE | 753420-0004 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | Cooled OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 106.3 |
| ETP No. | 260106 |
| Turbo OE | 753420-0004 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 39 |
| Exducer Diameter(II) | 33.2 |
| Tip Height(III) | 5.5 |
| Journal Bearing Diameter(IV) | 6.5 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 11 |
| Type Of Shaft | Slender |
| ETP No. | 280223 |
| Turbo OE | 753420-0004 |
| Compressor Wheel OE | 737683-0003 |
| Ref | |
| Inducer Diameter(III) | 31.1 |
| Exducer Diameter(IV) | 44 |
| Tip Height(II) | 3.6 |
| Total Height(I) | 24.2 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Deep Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360110 |
| Turbo OE | 753420-0004 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | 45.00 |
| Plate Diameter(II) | 114.1 |
| Plate Diameter(I) | 117.4 |
| Plate Depth(IV) | 13.4 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
