Language:
| Turbo Model | TD025 |
| Vehicle OE No | 28231-27000 |
| Model | Santafe / Trajet / Avante / Cerato / Carens / Tuscon Sportag |
| Engine | 2L |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | NA | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | NA | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 49173-02410 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 56 |
| ETP No. | |
| Turbo OE | 49173-02410 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 37 |
| Exducer Diameter(II) | 31.5 |
| Tip Height(III) | 6.1 |
| Journal Bearing Diameter(IV) | 6 |
| Comp Wheel Bore(V) | 4 |
| Number of Blades | 12 |
| Type Of Shaft | 12 |
| ETP No. | |
| Turbo OE | 49173-02410 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | 34.1 |
| Exducer Diameter(IV) | 44 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 21.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4 |
| ETP No. | |
| Turbo OE | 49173-02410 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 39.9 |
| Plate Depth(IV) | 10 |
| Plate Diameter(V) | 7.9 |
| Flatback / Superback | Superback |
