Language:
| Turbo Model | GT1749S |
| Vehicle OE No | 28200-42600 |
| Model | Van/Light Truck (01-) 2.5L D |
| Engine | 4D56 TCI |
| ETP # | OE # | Ref # | |
| CHRA | 660164 in stock | 433352-0031 | |
| Bearing Housing | 110136 in stock | 434578-0012 | |
| Shaft & Wheel | 260128 in stock | 434714-0021 | |
| Compressor Wheel | 280224 in stock | 436132-0003 | |
| Back Plate | 360124 in stock | 433294-0002 | |
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 452540-0003 | ||
| Compressor Cover | 435791-0104 | ||
| Actuator | 432340-0112 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.92 -0.95 bar = 1.00 mm | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110136 |
| Turbo OE | 715843-0001 |
| Bearing Housing OE | 434578-0012 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260128 |
| Turbo OE | 715843-0001 |
| Shaft & Wheel OE | 434714-0021 |
| Ref | |
| Inducer Diameter(I) | 44 |
| Exducer Diameter(II) | 37.3 |
| Tip Height(III) | 5.7 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | 280224 |
| Turbo OE | 715843-0001 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360124 |
| Turbo OE | 715843-0001 |
| Seal Plate & Back Plate OE | 433294-0002 |
| Ref | |
| Plate Diameter(III) | 50.20 |
| Plate Diameter(II) | 97.7 |
| Plate Diameter(I) | 119.8 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
