Language:
| Turbo Model | GT1544V |
| Vehicle OE No | 282012A110 |
| Model | Elantra |
| Engine | U1.6L Euro4 |
| ETP # | OE # | Ref # | |
| CHRA | 660110 in stock | NA | |
| Bearing Housing | 110109 in stock | NA | |
| Shaft & Wheel | 260107 in stock | NA | |
| Compressor Wheel | 280221 in stock | NA | |
| Back Plate | 360111 in stock | 700593-0001 | |
| Heat Shield | 350103 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | 433483-0052 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110109 |
| Turbo OE | 740611-0003 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260107 |
| Turbo OE | 740611-0003 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 39 |
| Exducer Diameter(II) | 33.2 |
| Tip Height(III) | 5.5 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | 280221 |
| Turbo OE | 740611-0003 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360111 |
| Turbo OE | 740611-0003 |
| Seal Plate & Back Plate OE | 700593-0001 |
| Ref | |
| Plate Diameter(III) | 45.00 |
| Plate Diameter(II) | 84.15 |
| Plate Diameter(I) | 95 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
