Language:
| Turbo Model | TD04HL-15G |
| Vehicle OE No | 8970452140 |
| Model | NA |
| Engine | 4BD1-T |
| ETP # | OE # | Ref # | |
| CHRA | 49189-08100 | ||
| Bearing Housing | 49189-26400 | ||
| Shaft & Wheel | 49189-30100 | ||
| Compressor Wheel | 49189-40300 | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 49189-15610 | ||
| Compressor Cover | 49189-55710 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 49189-00520 |
| Bearing Housing OE | 49189-26400 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 49189-00520 |
| Shaft & Wheel OE | 49189-30100 |
| Ref | |
| Inducer Diameter(I) | 52.0 |
| Exducer Diameter(II) | 45.6 |
| Tip Height(III) | 8.9 |
| Journal Bearing Diameter(IV) | 7.5 |
| Comp Wheel Bore(V) | 5.0 |
| Number of Blades | 12 |
| Type Of Shaft | TD04HL |
| ETP No. | |
| Turbo OE | 49189-00520 |
| Compressor Wheel OE | 49189-40300 |
| Ref | |
| Inducer Diameter(III) | 43.4 |
| Exducer Diameter(IV) | 56 |
| Tip Height(II) | 5.4 |
| Total Height(I) | 23 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Flatback |
| Shaft / Bore | 5.0 |
| ETP No. | |
| Turbo OE | 49189-00520 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
