Language:
| Turbo Model | K03-2074CCB5.88KCAXD |
| Vehicle OE No | 504154738 |
| Model | Passenger car |
| Engine | 2.3L DI F1A UAZ |
| ETP # | OE # | Ref # | |
| CHRA | 5303-710-0519 | ||
| Bearing Housing | 5304-151-0003 | ||
| Shaft & Wheel | 5303-120-5023 | ||
| Compressor Wheel | 5304-123-2202 | ||
| Back Plate | 5304-151-5716 | ||
| Heat Shield | 5304-151-5716 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9091 | ||
| Compressor Cover | 5304-100-5079 | ||
| Actuator | 5820-110-4291 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 180 | ||
| C/hsg Angle | 246 | ||
| Actuator Calibration 1 | Pressure 1.4 Bar = 2.2mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0078 |
| Bearing Housing OE | 5304-151-0003 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5303-970-0078 |
| Shaft & Wheel OE | 5303-120-5023 |
| Ref | |
| Inducer Diameter(I) | 45 |
| Exducer Diameter(II) | 40.3 |
| Tip Height(III) | 7.7 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5303-970-0078 |
| Compressor Wheel OE | 5304-123-2202 |
| Ref | |
| Inducer Diameter(III) | 37.8 |
| Exducer Diameter(IV) | 51 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 25.7 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | 2074 Superback |
| Shaft / Bore | 4.6 |
| ETP No. | |
| Turbo OE | 5303-970-0078 |
| Seal Plate & Back Plate OE | 5304-151-5716 |
| Ref | |
| Plate Diameter(III) | 52.00 |
| Plate Diameter(II) | 85.2 |
| Plate Diameter(I) | 108.8 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
