Language:
| Turbo Model | K03-2074DCB5.88KCAXD |
| Vehicle OE No | 504125522 |
| Model | Ducato |
| Engine | 2.3L DI F1A |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | 5304-151-0003 | ||
| Shaft & Wheel | 5303-120-5037 | ||
| Compressor Wheel | 5304-123-2209 | ||
| Back Plate | 5304-151-5716 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9091 | ||
| Compressor Cover | 5304-100-5073 | ||
| Actuator | 5820-110-4295 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 180 | ||
| C/hsg Angle | 288 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0102 |
| Bearing Housing OE | 5304-151-0003 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5303-970-0102 |
| Shaft & Wheel OE | 5303-120-5037 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 5303-970-0102 |
| Compressor Wheel OE | 5304-123-2209 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 5303-970-0102 |
| Seal Plate & Back Plate OE | 5304-151-5716 |
| Ref | |
| Plate Diameter(III) | 52.00 |
| Plate Diameter(II) | 85.2 |
| Plate Diameter(I) | 108.8 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
