Language:
| Turbo Model | BV43-2074DCBAA419.18BVAXK |
| Vehicle OE No | 28200-4A470 |
| Model | Sorento |
| Engine | A-engine Euro4 |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | 5303-151-1500 | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | 5304-123-2209 | ||
| Back Plate | 5304-151-5719 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0122 |
| Bearing Housing OE | 5303-151-1500 |
| Ref | |
| VNT or Non-VNT | 1 |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5303-970-0122 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 42.9 |
| Exducer Diameter(II) | 39.1 |
| Tip Height(III) | 7 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5303-970-0122 |
| Compressor Wheel OE | 5304-123-2209 |
| Ref | |
| Inducer Diameter(III) | 37.8 |
| Exducer Diameter(IV) | 53.8 |
| Tip Height(II) | 4.1 |
| Total Height(I) | 26.7 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 5303-970-0122 |
| Seal Plate & Back Plate OE | 5304-151-5719 |
| Ref | |
| Plate Diameter(III) | 52 |
| Plate Diameter(II) | 76 |
| Plate Diameter(I) | 108 |
| Plate Depth(IV) | 16.7 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | - |
