Language:
| Turbo Model | GT2052ELS |
| Vehicle OE No | 467916880 |
| Model | Thesis 20V |
| Engine | M.648.19 |
| ETP # | OE # | Ref # | |
| CHRA | 660181 in stock | 433352-0046 | |
| Bearing Housing | 110136 in stock | 713782-0001 | |
| Shaft & Wheel | 260136 in stock | 434715-0039 | |
| Compressor Wheel | 280244 in stock | 702492-0001 | |
| Back Plate | 360125 in stock | 701335-0004 | |
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 720316-0001 | ||
| Compressor Cover | 433102-0021 | ||
| Actuator | 434502-0009 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -138,000rpm | ||
| T/hsg Angle | 210 | ||
| C/hsg Angle | 17.3 | ||
| Actuator Calibration 1 | 0.640 -0.750 = 4.00 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110136 |
| Turbo OE | 714334-0001 |
| Bearing Housing OE | 713782-0001 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260136 |
| Turbo OE | 714334-0001 |
| Shaft & Wheel OE | 434715-0039 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 6.2 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | 280244 |
| Turbo OE | 714334-0001 |
| Compressor Wheel OE | 702492-0001 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4 |
| Total Height(I) | 26 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360125 |
| Turbo OE | 714334-0001 |
| Seal Plate & Back Plate OE | 701335-0004 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | superback |
