Language:
| Turbo Model | GT2256V |
| Vehicle OE No | 7785838G04 |
| Model | Range Rover TD6 |
| Engine | M57D L30 LL |
| ETP # | OE # | Ref # | |
| CHRA | 660312 in stock | NA | |
| Bearing Housing | 110145 in stock | 722282-0022 | |
| Shaft & Wheel | 260137 in stock | 434882-0008 | |
| Compressor Wheel | 280256 in stock | 436563-0001 | |
| Back Plate | 360139 in stock | 434820-0003 | |
| Heat Shield | 350108 in stock | 443768-0003 | |
| Nozzle Ring Assembly | 704050-0013 | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | 434855-0087 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 140 | ||
| C/hsg Angle | 275 | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.197 -0.203 bar = 0.8 -4.2 mm | ||
| Actuator Calibration 3 | 0.620 bar = Vanes Closed | ||
| ETP No. | 110145 |
| Turbo OE | 712541-0004 |
| Bearing Housing OE | 722282-0022 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260137 |
| Turbo OE | 712541-0004 |
| Shaft & Wheel OE | 434882-0008 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280256 |
| Turbo OE | 712541-0004 |
| Compressor Wheel OE | 436563-0001 |
| Ref | |
| Inducer Diameter(III) | 41.6 |
| Exducer Diameter(IV) | 56 |
| Tip Height(II) | 4.6 |
| Total Height(I) | 30.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Deep Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360139 |
| Turbo OE | 712541-0004 |
| Seal Plate & Back Plate OE | 434820-0003 |
| Ref | |
| Plate Diameter(III) | 57.50 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 13.7 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
