Language:
| Turbo Model | K04-2274DCB TG HWTS MONO FLOW |
| Vehicle OE No | L33L13700B |
| Model | CX-7 |
| Engine | 2,3 DISI NA |
| ETP # | OE # | Ref # | |
| CHRA | 5304-710-9904 | ||
| Bearing Housing | NA | ||
| Shaft & Wheel | 5304-120-6507 | ||
| Compressor Wheel | NA | ||
| Back Plate | 5304-151-5708 | ||
| Heat Shield | 5304-165-2002 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | K0422-582 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | K0422-582 |
| Shaft & Wheel OE | 5304-120-6507 |
| Ref | |
| Inducer Diameter(I) | 49.9 |
| Exducer Diameter(II) | 43.6 |
| Tip Height(III) | 7.6 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 12 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | K0422-582 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | 41.2 |
| Exducer Diameter(IV) | 59.2 |
| Tip Height(II) | 4.2 |
| Total Height(I) | 27.7 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4.6 |
| ETP No. | |
| Turbo OE | K0422-582 |
| Seal Plate & Back Plate OE | 5304-151-5708 |
| Ref | |
| Plate Diameter(III) | 57.20 |
| Plate Diameter(II) | 86.6 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.8 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
