Language:
| Turbo Model | K04-2074DCB6.82GCAXC |
| Vehicle OE No | 6460900380 |
| Model | Sprinter |
| Engine | OM646DE22LA |
| ETP # | OE # | Ref # | |
| CHRA | 660316 in stock | NA | |
| Bearing Housing | 110154 in stock | 5304-151-0006 | |
| Shaft & Wheel | 260158 in stock | 5304-120-5010 | |
| Compressor Wheel | 280272 in stock | 5304-123-2209 | |
| Back Plate | 360145 in stock | NA | |
| Heat Shield | 350114 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 76 | ||
| C/hsg Angle | 314 | ||
| Actuator Calibration 1 | Pressure 1.15 Bar = 3.0mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110154 |
| Turbo OE | 5304-970-0057 |
| Bearing Housing OE | 5304-151-0006 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | WATER |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 62 |
| ETP No. | 260158 |
| Turbo OE | 5304-970-0057 |
| Shaft & Wheel OE | 5304-120-5010 |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 42 |
| Tip Height(III) | 6.4 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 12 |
| Type Of Shaft | Straight |
| ETP No. | 280272 |
| Turbo OE | 5304-970-0057 |
| Compressor Wheel OE | 5304-123-2209 |
| Ref | |
| Inducer Diameter(III) | 38 |
| Exducer Diameter(IV) | 51 |
| Tip Height(II) | - |
| Total Height(I) | 25.7 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | - |
| ETP No. | 360145 |
| Turbo OE | 5304-970-0057 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
