Language:
| Turbo Model | GT1749V |
| Vehicle OE No | A6280960099 |
| Model | S class |
| Engine | OM628 |
| ETP # | OE # | Ref # | |
| CHRA | 703890-0016 | ||
| Bearing Housing | 722282-0016 | ||
| Shaft & Wheel | 434533-0013 | ||
| Compressor Wheel | 702489-0004 | ||
| Back Plate | 703682-0045 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | 704013-0005 | ||
| Turbine Housing | 709707-0001 | ||
| Compressor Cover | 709711-0001 | ||
| Actuator | 704063-0005 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 709719-0001 |
| Bearing Housing OE | 722282-0016 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 709719-0001 |
| Shaft & Wheel OE | 434533-0013 |
| Ref | |
| Inducer Diameter(I) | 43.1 |
| Exducer Diameter(II) | 38.1 |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 709719-0001 |
| Compressor Wheel OE | 702489-0004 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 709719-0001 |
| Seal Plate & Back Plate OE | 703682-0045 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 89.6 |
| Plate Diameter(I) | 99 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
