Language:
| Turbo Model | GT1852V |
| Vehicle OE No | A6110960999 |
| Model | New C class |
| Engine | OM611 W203 |
| ETP # | OE # | Ref # | |
| CHRA | 660173 in stock | 703890-0044 | |
| Bearing Housing | 110121 in stock | 722282-0013 | |
| Shaft & Wheel | 260129 in stock | 704580-0001 | |
| Compressor Wheel | 280245 in stock | 436131-0021 | |
| Back Plate | 360127 in stock | 701335-0003 | |
| Heat Shield | 350106 in stock | 433112-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 711005-0002 | ||
| Compressor Cover | 702660-0001 | ||
| Actuator | 434855-0058 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.297 -0.303 bar = 1.5 -3.4 mm | ||
| Actuator Calibration 2 | 0.567 -0.593 bar = 0.2 mm | ||
| Actuator Calibration 3 | 0.593 -0.620 bar = Vanes Closed | ||
| ETP No. | 110121 |
| Turbo OE | 711006-0001 |
| Bearing Housing OE | 722282-0013 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260129 |
| Turbo OE | 711006-0001 |
| Shaft & Wheel OE | 704580-0001 |
| Ref | |
| Inducer Diameter(I) | 44.5 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 8.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | 280245 |
| Turbo OE | 711006-0001 |
| Compressor Wheel OE | 436131-0021 |
| Ref | |
| Inducer Diameter(III) | 36.8 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4.4 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360127 |
| Turbo OE | 711006-0001 |
| Seal Plate & Back Plate OE | 701335-0003 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
