Language:
| Turbo Model | GT1746S |
| Vehicle OE No | A6110961199 |
| Model | C220 |
| Engine | OM611 DE 22LA |
| ETP # | OE # | Ref # | |
| CHRA | 660129 in stock | 433289-0145 | |
| Bearing Housing | 110110 in stock | 433275-0002 | |
| Shaft & Wheel | 260110 in stock | 434714-0013 | |
| Compressor Wheel | 280222 in stock | 436624-0002 | |
| Back Plate | 360135 in stock | 701335-0008 | |
| Heat Shield | 350104 in stock | 434302-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 434575-0005 | ||
| Compressor Cover | 712291-0009 | ||
| Actuator | 434632-0009 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.8G Max 0 -108,000rpm / 2.5G Max 108,000 -150,0 | ||
| T/hsg Angle | 280 | ||
| C/hsg Angle | 180 | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.120 = 1.00 -4.00 | ||
| Actuator Calibration 3 | 0.500 = Vanes Closed | ||
| ETP No. | 110110 |
| Turbo OE | 715383-0001 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260110 |
| Turbo OE | 715383-0001 |
| Shaft & Wheel OE | 434714-0013 |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 42.7 |
| Tip Height(III) | 8.2 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280222 |
| Turbo OE | 715383-0001 |
| Compressor Wheel OE | 436624-0002 |
| Ref | |
| Inducer Diameter(III) | 34.1 |
| Exducer Diameter(IV) | 46 |
| Tip Height(II) | 4.3 |
| Total Height(I) | 23.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360135 |
| Turbo OE | 715383-0001 |
| Seal Plate & Back Plate OE | 701335-0008 |
| Ref | |
| Plate Diameter(III) | 47.10 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
