Language:
| Turbo Model | GT2256V |
| Vehicle OE No | A6120960599 |
| Model | E270 CDI |
| Engine | OM612 |
| ETP # | OE # | Ref # | |
| CHRA | 660190 in stock | 703891-0024 | |
| Bearing Housing | 110143 in stock | 722282-0020 | |
| Shaft & Wheel | 260137 in stock | 434882-0005 | |
| Compressor Wheel | 280250 in stock | 436336-0019 | |
| Back Plate | 360139 in stock | 434820-0003 | |
| Heat Shield | 350108 in stock | 443768-0003 | |
| Nozzle Ring Assembly | 717506-0005 | ||
| Turbine Housing | 711008-0001 | ||
| Compressor Cover | 700819-0003 | ||
| Actuator | 434855-0059 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.297 -0.303 bar = 2.8 -4.7 mm | ||
| Actuator Calibration 2 | 0.567 -0.593 bar = 0.2 mm | ||
| Actuator Calibration 3 | 0.620 bar = Vanes Closed | ||
| ETP No. | 110143 |
| Turbo OE | 715910-0001 |
| Bearing Housing OE | 722282-0020 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260137 |
| Turbo OE | 715910-0001 |
| Shaft & Wheel OE | 434882-0005 |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 42.7 |
| Tip Height(III) | 8.2 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280250 |
| Turbo OE | 715910-0001 |
| Compressor Wheel OE | 436336-0019 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360139 |
| Turbo OE | 715910-0001 |
| Seal Plate & Back Plate OE | 434820-0003 |
| Ref | |
| Plate Diameter(III) | 57.10 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 13.7 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
