Language:
| Turbo Model | GT2359V |
| Vehicle OE No | A6480960099 |
| Model | S class (W220) |
| Engine | OM648 |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | 703891-0086 | ||
| Shaft & Wheel | 434717-0012 | ||
| Compressor Wheel | 702549-0014 | ||
| Back Plate | 703682-0052 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 711016-0002 | ||
| Compressor Cover | 727880-0001 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 734899-0001 |
| Bearing Housing OE | 703891-0086 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 734899-0001 |
| Shaft & Wheel OE | 434717-0012 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 734899-0001 |
| Compressor Wheel OE | 702549-0014 |
| Ref | |
| Inducer Diameter(III) | 44.4 |
| Exducer Diameter(IV) | 59.4 |
| Tip Height(II) | 5.9 |
| Total Height(I) | 32.4 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 734899-0001 |
| Seal Plate & Back Plate OE | 703682-0052 |
| Ref | |
| Plate Diameter(III) | 61.5 |
| Plate Diameter(II) | 116 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 13.74 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
