Language:
| Turbo Model | GT15 |
| Vehicle OE No | PMF100500 |
| Model | MGZR 25 |
| Engine | TCI/E L series |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0042 | ||
| Bearing Housing | 433275-0002 | ||
| Shaft & Wheel | 434713-0007 | ||
| Compressor Wheel | 436132-0003 | ||
| Back Plate | 436399-0002 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 436820-0002 | ||
| Compressor Cover | 703667-0004 | ||
| Actuator | 434133-0030 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -108,000rpm / 3.0G Max 108,000 -168,0 | ||
| T/hsg Angle | 140 | ||
| C/hsg Angle | 200 | ||
| Actuator Calibration 1 | 1.144 -1.196 = 1.00 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452283-0003 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 452283-0003 |
| Shaft & Wheel OE | 434713-0007 |
| Ref | |
| Inducer Diameter(I) | 41.5 |
| Exducer Diameter(II) | 33.8 |
| Tip Height(III) | 7.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 452283-0003 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 452283-0003 |
| Seal Plate & Back Plate OE | 436399-0002 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 118 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
