Language:
| Turbo Model | GT2256V |
| Vehicle OE No | 46799070 |
| Model | NA |
| Engine | NA |
| ETP # | OE # | Ref # | |
| CHRA | 703891-0035 | ||
| Bearing Housing | 722282-0056 | ||
| Shaft & Wheel | 434882-0012 | ||
| Compressor Wheel | 707747-0002 | ||
| Back Plate | 701335-0010 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | 717506-0006 | ||
| Turbine Housing | 704052-0028 | ||
| Compressor Cover | 433102-0015 | ||
| Actuator | 723455-0006 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 172 | ||
| C/hsg Angle | 35 | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.264 -0.269 bar = 3.5 -6.0 mm | ||
| Actuator Calibration 3 | 0.620 bar = Vanes Closed | ||
| ETP No. | |
| Turbo OE | 716625-0001 |
| Bearing Housing OE | 722282-0056 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 716625-0001 |
| Shaft & Wheel OE | 434882-0012 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 716625-0001 |
| Compressor Wheel OE | 707747-0002 |
| Ref | |
| Inducer Diameter(III) | 39.6 |
| Exducer Diameter(IV) | 56 |
| Tip Height(II) | 6.4 |
| Total Height(I) | 33 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | 50 |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 716625-0001 |
| Seal Plate & Back Plate OE | 701335-0010 |
| Ref | |
| Plate Diameter(III) | 57.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | - |
| Plate Diameter(V) | 10 |
| Flatback / Superback | - |
