Language:
| ETP # | OE # | Ref # | |
| CHRA | 660192 in stock | NA | |
| Bearing Housing | 110140 in stock | 722282-0006 | |
| Shaft & Wheel | 260141 in stock | NA | |
| Compressor Wheel | 280258 in stock | 720915-0004 | |
| Back Plate | 360136 in stock | NA | |
| Heat Shield | 350108 in stock | 443768-0003 | |
| Nozzle Ring Assembly | 370117 in stock | NA | |
| Turbine Housing | 220119 in stock | NA | |
| Compressor Cover | 240117 in stock | NA | |
| Actuator | 390141 in stock | NA | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.8G Max 0 -60,000rpm / 1.2G Max 60,000 -108,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110140 |
| Turbo OE | 753392-0001 |
| Bearing Housing OE | 722282-0006 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260141 |
| Turbo OE | 753392-0001 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 46 |
| Tip Height(III) | 9.4 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280258 |
| Turbo OE | 753392-0001 |
| Compressor Wheel OE | 720915-0004 |
| Ref | |
| Inducer Diameter(III) | 44.5 |
| Exducer Diameter(IV) | 60 |
| Tip Height(II) | 4.8 |
| Total Height(I) | 32.4 |
| Number of Blades | 5 |
| Flatback / Superback(Trim) | Deep Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360136 |
| Turbo OE | 753392-0001 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | 61.50 |
| Plate Diameter(II) | 116 |
| Plate Diameter(I) | 138.1 |
| Plate Depth(IV) | 13.7 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
