Language:
| Turbo Model | TF035HL2-12GK2-VGK |
| Vehicle OE No | MR597925 |
| Model | Delica |
| Engine | 4D56 |
| ETP # | OE # | Ref # | |
| CHRA | 660265 in stock | 49135-08800 | |
| Bearing Housing | 110187 in stock | 49135-02500 | |
| Shaft & Wheel | 260184 in stock | TF035HL2 | |
| Compressor Wheel | 280319 in stock | 49135-00016 | |
| Back Plate | 310110 in stock | 49135-15405 | |
| Heat Shield | 350123 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110187 |
| Turbo OE | 49135-02672 |
| Bearing Housing OE | 49135-02500 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260184 |
| Turbo OE | 49135-02672 |
| Shaft & Wheel OE | TF035HL2 |
| Ref | |
| Inducer Diameter(I) | 43 |
| Exducer Diameter(II) | 37.7 |
| Tip Height(III) | 7 |
| Journal Bearing Diameter(IV) | 7.0 |
| Comp Wheel Bore(V) | 5.0 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | 280319 |
| Turbo OE | 49135-02672 |
| Compressor Wheel OE | 49135-00016 |
| Ref | |
| Inducer Diameter(III) | 37.8 |
| Exducer Diameter(IV) | 49.0 |
| Tip Height(II) | 5.1 |
| Total Height(I) | 24.2 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.0 |
| ETP No. | 310110 |
| Turbo OE | 49135-02672 |
| Seal Plate & Back Plate OE | 49135-15405 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 39.9 |
| Plate Depth(IV) | 10 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | SUPERBACK |
