Language:
| Turbo Model | K04-2275EYE6.88GCAXM |
| Vehicle OE No | 077145703P |
| Model | RS6 |
| Engine | 4,2l-V8 5V Biturbo |
| ETP # | OE # | Ref # | |
| CHRA | 660315 in stock | 5304-710-0512 | |
| Bearing Housing | 110155 in stock | 5304-150-0017 | |
| Shaft & Wheel | 260159 in stock | 5304-120-5018 | |
| Compressor Wheel | 5304-123-2203 | ||
| Back Plate | 360146 in stock | 5304-151-5708 | |
| Heat Shield | 350114 in stock | 5303-165-2000 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5304-100-9103 | ||
| Compressor Cover | 5304-101-5121 | ||
| Actuator | 5825-110-4113 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 180 | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.0 Bar = -2.0mm Rod Lift (Pretension) | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110155 |
| Turbo OE | 5304-970-0028 |
| Bearing Housing OE | 5304-150-0017 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | WATER |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 62 |
| ETP No. | 260159 |
| Turbo OE | 5304-970-0028 |
| Shaft & Wheel OE | 5304-120-5018 |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 44.5 |
| Tip Height(III) | 6.5 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 12 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5304-970-0028 |
| Compressor Wheel OE | 5304-123-2203 |
| Ref | |
| Inducer Diameter(III) | 41.9 |
| Exducer Diameter(IV) | 56 |
| Tip Height(II) | 5.9 |
| Total Height(I) | 25.7 |
| Number of Blades | 4 |
| Flatback / Superback(Trim) | 2275 Superback |
| Shaft / Bore | 4.6 |
| ETP No. | 360146 |
| Turbo OE | 5304-970-0028 |
| Seal Plate & Back Plate OE | 5304-151-5708 |
| Ref | |
| Plate Diameter(III) | 57.20 |
| Plate Diameter(II) | 86.6 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.8 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
