Language:
| Turbo Model | TB02/GT15 |
| Vehicle OE No | 144112J620 |
| Model | Primera |
| Engine | CD20T |
| ETP # | OE # | Ref # | |
| CHRA | 431876-0101 | ||
| Bearing Housing | 467475-0017 | ||
| Shaft & Wheel | 480246-0001 | ||
| Compressor Wheel | 410450-0014 | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 430609-0246 | ||
| Compressor Cover | 436496-0001 | ||
| Actuator | 434133-0026 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -80,000rpm | ||
| T/hsg Angle | 126 | ||
| C/hsg Angle | 246.5 | ||
| Actuator Calibration 1 | 0.737 -0.791 = 0.38 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452215-0002 |
| Bearing Housing OE | 467475-0017 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 452215-0002 |
| Shaft & Wheel OE | 480246-0001 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 452215-0002 |
| Compressor Wheel OE | 410450-0014 |
| Ref | |
| Inducer Diameter(III) | 37.2 |
| Exducer Diameter(IV) | 48 |
| Tip Height(II) | 3.9 |
| Total Height(I) | - |
| Number of Blades | 8 |
| Flatback / Superback(Trim) | 60 |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 452215-0002 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
