Language:
| Turbo Model | TB0210 |
| Vehicle OE No | NA |
| Model | NA |
| Engine | NA |
| ETP # | OE # | Ref # | |
| CHRA | 431876-0063 | ||
| Bearing Housing | 432351-0009 | ||
| Shaft & Wheel | 435243-0002 | ||
| Compressor Wheel | 410450-0014 | ||
| Back Plate | 432280-0001 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 430609-0103 | ||
| Compressor Cover | 409589-0058 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -85,000rpm | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0.38mm = 0.490 Bar-0.434 Ba | ||
| Actuator Calibration 2 | 8.00mm = 0.766 Bar-0.614 Bar | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 466370-0022 |
| Bearing Housing OE | 432351-0009 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 466370-0022 |
| Shaft & Wheel OE | 435243-0002 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 35.6 |
| Tip Height(III) | 7.3 |
| Journal Bearing Diameter(IV) | 9.2 |
| Comp Wheel Bore(V) | 6 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 466370-0022 |
| Compressor Wheel OE | 410450-0014 |
| Ref | |
| Inducer Diameter(III) | 37.2 |
| Exducer Diameter(IV) | 48 |
| Tip Height(II) | 3.9 |
| Total Height(I) | - |
| Number of Blades | 8 |
| Flatback / Superback(Trim) | 60 |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 466370-0022 |
| Seal Plate & Back Plate OE | 432280-0001 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 44.5 |
| Plate Depth(IV) | 6.7 |
| Plate Diameter(V) | 12.7 |
| Flatback / Superback | superback |
