Language:
| Turbo Model | GT1752S |
| Vehicle OE No | 14411-VB300 |
| Model | Patrol (97-00) 2.8L D |
| Engine | RD28TI |
| ETP # | OE # | Ref # | |
| CHRA | 479054-0003 | ||
| Bearing Housing | 479817-0001 | ||
| Shaft & Wheel | 433263-0001 | ||
| Compressor Wheel | 436131-0016 | ||
| Back Plate | 480303-0002 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 479470-0002 | ||
| Compressor Cover | 479633-0009 | ||
| Actuator | 480030-0005 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | 115 | ||
| C/hsg Angle | 150 | ||
| Actuator Calibration 1 | 0.900 -0.950 = 0.38 | ||
| Actuator Calibration 2 | 1.15 -1.21 bar = 4.00 mm | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 701196-0007 |
| Bearing Housing OE | 479817-0001 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 701196-0007 |
| Shaft & Wheel OE | 433263-0001 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 701196-0007 |
| Compressor Wheel OE | 436131-0016 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4.8 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 701196-0007 |
| Seal Plate & Back Plate OE | 480303-0002 |
| Ref | |
| Plate Diameter(III) | 52.80 |
| Plate Diameter(II) | 87.2 |
| Plate Diameter(I) | 107.5 |
| Plate Depth(IV) | - |
| Plate Diameter(V) | 9.3 |
| Flatback / Superback | - |
