Language:
| Turbo Model | GT2052S |
| Vehicle OE No | 14411G2408 |
| Model | TL18 light truck |
| Engine | TD27T |
| ETP # | OE # | Ref # | |
| CHRA | 660308 in stock | 433467-0004 | |
| Bearing Housing | 110110 in stock | 435911-0002 | |
| Shaft & Wheel | 260136 in stock | 434715-0027 | |
| Compressor Wheel | 280244 in stock | 436322-0006 | |
| Back Plate | 360128 in stock | 701335-0001 | |
| Heat Shield | 350104 in stock | 434684-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 436313-0008 | ||
| Compressor Cover | 713468-0007 | ||
| Actuator | 432340-0032 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.8G Max 0 -60,000rpm / 1.2G Max 60,000 -108,000 | ||
| T/hsg Angle | 90 | ||
| C/hsg Angle | 230 | ||
| Actuator Calibration 1 | 0.710 -0.750 = 0.38 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110110 |
| Turbo OE | 715645-0002 |
| Bearing Housing OE | 435911-0002 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260136 |
| Turbo OE | 715645-0002 |
| Shaft & Wheel OE | 434715-0027 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 6.2 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | 280244 |
| Turbo OE | 715645-0002 |
| Compressor Wheel OE | 436322-0006 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360128 |
| Turbo OE | 715645-0002 |
| Seal Plate & Back Plate OE | 701335-0001 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 96.15 |
| Plate Diameter(I) | 112.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
