Language:
| Turbo Model | GT1544S |
| Vehicle OE No | 045145701V400 |
| Model | 80 TDI -3 cyl. -1.4L DI D |
| Engine | NA |
| ETP # | OE # | Ref # | |
| CHRA | 660115 in stock | 433289-0209 | |
| Bearing Housing | 433275-0002 | ||
| Shaft & Wheel | 260108 in stock | 701698-0031 | |
| Compressor Wheel | 280226 in stock | 436133-0010 | |
| Back Plate | 360120 in stock | 434824-0003 | |
| Heat Shield | 350104 in stock | 434302-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 435788-0048 | ||
| Compressor Cover | 435791-0076 | ||
| Actuator | 433489-0004 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 190 | ||
| C/hsg Angle | 118 | ||
| Actuator Calibration 1 | 0.766 -0.833 bar = 1.00 mm | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 701729-0006 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260108 |
| Turbo OE | 701729-0006 |
| Shaft & Wheel OE | 701698-0031 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280226 |
| Turbo OE | 701729-0006 |
| Compressor Wheel OE | 436133-0010 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360120 |
| Turbo OE | 701729-0006 |
| Seal Plate & Back Plate OE | 434824-0003 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
