Language:
| Turbo Model | GT1544S |
| Vehicle OE No | 7700872574 |
| Model | Megane |
| Engine | F8Q730 |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0011 | ||
| Bearing Housing | 435793-0002 | ||
| Shaft & Wheel | 433165-0001 | ||
| Compressor Wheel | 433287-0004 | ||
| Back Plate | 433254-0001 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 433479-0001 | ||
| Compressor Cover | 433441-0001 | ||
| Actuator | 433480-0001 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -138,000rpm | ||
| T/hsg Angle | 105 | ||
| C/hsg Angle | 263 | ||
| Actuator Calibration 1 | 1.047 -1.113 = 1.00 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 454165-0001 |
| Bearing Housing OE | 435793-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 454165-0001 |
| Shaft & Wheel OE | 433165-0001 |
| Ref | |
| Inducer Diameter(I) | 41.5 |
| Exducer Diameter(II) | 35.2 |
| Tip Height(III) | 7.1 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 454165-0001 |
| Compressor Wheel OE | 433287-0004 |
| Ref | |
| Inducer Diameter(III) | 33 |
| Exducer Diameter(IV) | 44 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 22.3 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 454165-0001 |
| Seal Plate & Back Plate OE | 433254-0001 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 96.15 |
| Plate Diameter(I) | 112.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
