Language:
| Turbo Model | K03-2068CDC4.82KCBXD |
| Vehicle OE No | 8200084399 |
| Model | 8200084399 |
| Engine | F9Q-732/733/740/751 |
| ETP # | OE # | Ref # | |
| CHRA | 660213 in stock | 5303-710-0515 | |
| Bearing Housing | 110154 in stock | 5304-151-0006 | |
| Shaft & Wheel | 260157 in stock | 5303-120-5027 | |
| Compressor Wheel | 280280 in stock | 5304-123-2032 | |
| Back Plate | 360145 in stock | 5304-151-5714 | |
| Heat Shield | 350114 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9082 | ||
| Compressor Cover | 5304-101-5108 | ||
| Actuator | 5820-110-5010 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 285 | ||
| C/hsg Angle | 165 | ||
| Actuator Calibration 1 | Vaccuum -0.5 Bar = 7.5mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110154 |
| Turbo OE | 5303-970-0048 |
| Bearing Housing OE | 5304-151-0006 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 62 |
| ETP No. | 260157 |
| Turbo OE | 5303-970-0048 |
| Shaft & Wheel OE | 5303-120-5027 |
| Ref | |
| Inducer Diameter(I) | 45 |
| Exducer Diameter(II) | 38 |
| Tip Height(III) | 6.8 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | 280280 |
| Turbo OE | 5303-970-0048 |
| Compressor Wheel OE | 5304-123-2032 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360145 |
| Turbo OE | 5303-970-0048 |
| Seal Plate & Back Plate OE | 5304-151-5714 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
