Language:
| Turbo Model | KP35-1672DBK200.82ACAXD |
| Vehicle OE No | 8200507852 |
| Model | Passenger car |
| Engine | K9K (Euro 4) |
| ETP # | OE # | Ref # | |
| CHRA | 660233 in stock | NA | |
| Bearing Housing | 110162 in stock | 5439-151-0010 | |
| Shaft & Wheel | 260170 in stock | 5435-120-8500 | |
| Compressor Wheel | 280296 in stock | NA | |
| Back Plate | 310104 in stock | NA | |
| Heat Shield | 350112 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110162 |
| Turbo OE | 5435-970-0011 |
| Bearing Housing OE | 5439-151-0010 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 3 BOLT |
| ETP No. | 260170 |
| Turbo OE | 5435-970-0011 |
| Shaft & Wheel OE | 5435-120-8500 |
| Ref | |
| Inducer Diameter(I) | 34.7 |
| Exducer Diameter(II) | 29.2 |
| Tip Height(III) | 5.3 |
| Journal Bearing Diameter(IV) | 6.0 |
| Comp Wheel Bore(V) | 4.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280296 |
| Turbo OE | 5435-970-0011 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 310104 |
| Turbo OE | 5435-970-0011 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
