Language:
| Turbo Model | BV39-1867DCG426.18AVAXH |
| Vehicle OE No | 8200507856 |
| Model | Megane 1.5 dCi |
| Engine | K9K-Euro 4 |
| ETP # | OE # | Ref # | |
| CHRA | 660241 in stock | NA | |
| Bearing Housing | 110166 in stock | NA | |
| Shaft & Wheel | 260174 in stock | NA | |
| Compressor Wheel | 280301 in stock | NA | |
| Back Plate | 310106 in stock | NA | |
| Heat Shield | 350113 in stock | NA | |
| Nozzle Ring Assembly | 370122 in stock | NA | |
| Turbine Housing | 220132 in stock | NA | |
| Compressor Cover | 240128 in stock | NA | |
| Actuator | 390125 in stock | NA | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 301.5 | ||
| C/hsg Angle | 251 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110166 |
| Turbo OE | 5439-970-0030 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260174 |
| Turbo OE | 5439-970-0030 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 38.5 |
| Exducer Diameter(II) | 34.5 |
| Tip Height(III) | 6.5 |
| Journal Bearing Diameter(IV) | 6 |
| Comp Wheel Bore(V) | 4.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280301 |
| Turbo OE | 5439-970-0030 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 310106 |
| Turbo OE | 5439-970-0030 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
