Language:
| Turbo Model | GT1749V |
| Vehicle OE No | 8200544912 |
| Model | Laguna dCi |
| Engine | F9Q |
| ETP # | OE # | Ref # | |
| CHRA | 660157 in stock | NA | |
| Bearing Housing | 110125 in stock | 722282-0061 | |
| Shaft & Wheel | 260119 in stock | 434533-0006 | |
| Compressor Wheel | 280224 in stock | 703925-0003 | |
| Back Plate | 360112 in stock | 700593-0003 | |
| Heat Shield | 350106 in stock | 433112-0001 | |
| Nozzle Ring Assembly | 370104 in stock | NA | |
| Turbine Housing | 220111 in stock | NA | |
| Compressor Cover | 240113 in stock | NA | |
| Actuator | 390111 in stock | NA | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110125 |
| Turbo OE | 708639-0008 |
| Bearing Housing OE | 722282-0061 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 106.3 |
| ETP No. | 260119 |
| Turbo OE | 708639-0008 |
| Shaft & Wheel OE | 434533-0006 |
| Ref | |
| Inducer Diameter(I) | 43.1 |
| Exducer Diameter(II) | 37.5 |
| Tip Height(III) | 6.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280224 |
| Turbo OE | 708639-0008 |
| Compressor Wheel OE | 703925-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360112 |
| Turbo OE | 708639-0008 |
| Seal Plate & Back Plate OE | 700593-0003 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 91.25 |
| Plate Diameter(I) | 111 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
.png)
