Language:
| Turbo Model | GT2056S |
| Vehicle OE No | 8200184484 |
| Model | Trafic |
| Engine | G9U730 |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0197 | ||
| Bearing Housing | 435911-0002 | ||
| Shaft & Wheel | 434715-0054 | ||
| Compressor Wheel | 436563-0010 | ||
| Back Plate | 434820-0003 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 700866-0011 | ||
| Compressor Cover | 725381-0005 | ||
| Actuator | 703785-0009 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | 157 | ||
| C/hsg Angle | 90 | ||
| Actuator Calibration 1 | 0.120 = 2.00 -4.00 | ||
| Actuator Calibration 2 | 0.400 = 10.0 -12.0 | ||
| Actuator Calibration 3 | 0.450 = Vanes Closed | ||
| ETP No. | |
| Turbo OE | 714652-0004 |
| Bearing Housing OE | 435911-0002 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 714652-0004 |
| Shaft & Wheel OE | 434715-0054 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 714652-0004 |
| Compressor Wheel OE | 436563-0010 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 714652-0004 |
| Seal Plate & Back Plate OE | 434820-0003 |
| Ref | |
| Plate Diameter(III) | 57.50 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129.1 |
| Plate Depth(IV) | 13.7 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Deep superback |
