Language:
| Turbo Model | GT1852V |
| Vehicle OE No | 8200267138 |
| Model | Laguna 150HP (02-) 2.2L D |
| Engine | G9T702 |
| ETP # | OE # | Ref # | |
| CHRA | 660174 in stock | 703890-0138 | |
| Bearing Housing | 110137 in stock | 722282-0091 | |
| Shaft & Wheel | 260129 in stock | 704580-0008 | |
| Compressor Wheel | 280246 in stock | 702492-0011 | |
| Back Plate | 360125 in stock | 701335-0004 | |
| Heat Shield | 350106 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 715697-0002 | ||
| Compressor Cover | 725381-0004 | ||
| Actuator | 434855-0074 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110137 |
| Turbo OE | 718089-0006 |
| Bearing Housing OE | 722282-0091 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260129 |
| Turbo OE | 718089-0006 |
| Shaft & Wheel OE | 704580-0008 |
| Ref | |
| Inducer Diameter(I) | 44.5 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 8.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | 280246 |
| Turbo OE | 718089-0006 |
| Compressor Wheel OE | 702492-0011 |
| Ref | |
| Inducer Diameter(III) | 36.8 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 3.7 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360125 |
| Turbo OE | 718089-0006 |
| Seal Plate & Back Plate OE | 701335-0004 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 129 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
