Language:
| Turbo Model | GT1549P |
| Vehicle OE No | 8200052297 |
| Model | Espace |
| Engine | G9T |
| ETP # | OE # | Ref # | |
| CHRA | 660108 in stock | 702378-0014 | |
| Bearing Housing | 110107 in stock | 713892-0004 | |
| Shaft & Wheel | 260105 in stock | 713892-0004 | |
| Compressor Wheel | 280236 in stock | 702489-0001 | |
| Back Plate | 360112 in stock | 703682-0021 | |
| Heat Shield | 350101 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 701219-0015 | ||
| Compressor Cover | 709516-0006 | ||
| Actuator | 714000-0005 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 105 | ||
| C/hsg Angle | 180 | ||
| Actuator Calibration 1 | 0.510 -0.550 bar = 1.00 mm | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110107 |
| Turbo OE | 725071-0002 |
| Bearing Housing OE | 713892-0004 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260105 |
| Turbo OE | 725071-0002 |
| Shaft & Wheel OE | 713892-0004 |
| Ref | |
| Inducer Diameter(I) | 40 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280236 |
| Turbo OE | 725071-0002 |
| Compressor Wheel OE | 702489-0001 |
| Ref | |
| Inducer Diameter(III) | 36.4 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4 |
| Total Height(I) | 25 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360112 |
| Turbo OE | 725071-0002 |
| Seal Plate & Back Plate OE | 703682-0021 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
